Previous
Next
Odin - laser engraver
A Thunderlaser new product in 2020, the Odin series laser machine combines small size, compact, high quality engraving and cutting at a low cost. With 3G acceleration and 80 IPS (2000mm/sec) engraving speed, it provides a super fast laser engraving solution for industry. The RF tube allows fantastic beam signature and is air cooled, you don’t have to worry about a water chiller. The gantry payload is minimal and is super smooth.
Features
What's Included
Specs
FAQ
Features
-
High Speed Motor
Japanese ORIENTAL motor systems on X and Y axes, with 80 IPS (2000mm/s) and 3G acceleration engraving speed.
New: 100% smoother guide Rail
Patent guide rail developed by Thunder Laser, less resistance and low noise.
New: 1,000 DPI RF metal laser source
With excellent quality Beam output and stable laser power, lifespan up to 10,000 hours.
New: Upper & Lower Vent
To timely remove the heat from material surface.
Newly-designed focus lens and mirror holder
Easier to clean and replace lens and mirrors, Lenses of different FL are swappable in the same mount.
New Auto focus
No limitation for materials or working area, more accurate.
What's Included
-
Air Assist
Exhaust
2″ Head
Tool Kit
Cleaning Kit
Honeycomb / Knife Bed
Alarm Lamp
Smart Board
Red Dot Pointer
Specs
| Laser System | Odin 22 | Odin 32 | ||
|---|---|---|---|---|
| Laser Tube Wattage | 30 Watt | 55 Watt （Coherent） | ||
| Working Area | 559 x 381 mm (22″ x 15″) | 813 x 508 mm (32″ x 20″) | ||
| Table Size | 625 x 440 mm (24.6″ x 17.3″) | 899 x 567 mm (35.4″ x 22.3″) | ||
| Max Part Size(W x L x H) | 625 x 440 mm x 185mm(24.6″ x 17.3″ x 7.3″) | 899 x 567 mm x 185mm(35.4″ x 22.3″ x 7.3″) | ||
| Dimensions(W x D x H) | 1030x860x1090mm (40″ x 34″ x 43″) | 1284x987x1090mm (51″ x 39″ x 43″) | ||
| Laser Type | Radio Frequency Laser Tube | |||
| Cooling | Air Cooled | |||
| Maximum Speed | 2000MM/S | |||
| Maximum machining size at 1000 speed – lightweight laser head | 529 x 381 mm(20.8″ x 15″) | 783 x 508 mm(30.8″ x 20″) | ||
| Maximum machining size at 2000 speed – lightweight laser head | 461 x 381 mm(18″ x 15″) | 715 x 508 mm(28″ x 20″) | ||
| Speed and Power Control | Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping. | |||
| Operating Modes | Optimized raster,vector,and combined mode | |||
| Resolution(DPI) | User controlled from 100 to 1000DPI(standard laser head) | |||
| Computer Interface | Ethernet and USB Connection | |||
| Compatible Operating Systems | Windows, Mac, and Linux (Mac and Linux with LightBurn Software) | |||
| Buffer Memory | 128MB Standard | |||
| Display Panel | 3.5″ LCD panel showing current file, total working time, laser power, speed, etc… | |||
| Electrical Requirements | Requirements110 to 240 volts,50 or 60 Hz,single phase | |||
| Z-Axis Height | 185mm (7.3″) | 185mm (7.3″) | ||
| Net Weight | 125kgs (275lbs) | 300kgs (661lbs) | ||
| Motion Control System | High-Speed Stepper Motors | |||
| Speed and Power Control(engraving depth) |
Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping. |
|||
| Operating Modes | Optimized raster, vector, and combined mode | |||
| Ventilation System | Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case. | |||
| Max. Speed | 2000mm/s | |||
| Workpiece table | Solid metal blades & Honeycomb table | |||
| Max. table load | 20kg / 44lbs | |||
FAQ
-
FAQ
Laptop& Desktop PC both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10. But if you use a Mac you need to buy a Lightburn software with $80 https://lightburnsoftware.com/collections/frontpage/products/lightburn-dspCorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAWAs long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too. https://www.thunderlaser.com/video/what-laser-cutter-can-create.html https://www.thunderlaser.com/video/how-to-use-your-laser-machine.html https://www.thunderlaser.com/video/how-to-use-your-laser-software.htmlNo, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
Accessories
Camera
you can closely monitor your lasers and position designs directly on products laid out on your machine's workspace.
Focus lenses
The more detailed the graphics, the shorter the focal length in laser engraving. The thicker the material to be laser-cut, the greater the focal length should be.
Air compressor
The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator...
Rotary
Installing a rotary roller in your laser engraving machine for cylindrical glass, wood, or metal products.
Lightburn DSP license key
Thunderlaser exclusive lightburn DSP license key
Get in touch
Phone
+1403 - 814 - 9808
sales@thunderlaser.ca
Address
Fuse33 Makerspace
1720 Radisson Drive SE Calgary, AB, Canada. T2A1Z8