Nova - Laser System
Our NOVA laser cutter series carries all the best components like Hybrid servo motors
which allow for excellent engraving quality with high resolution. Users can also upgrade to the RF tube to reach an even higher cutting and engraving quality, and we have several
more user-friendly designs included in this excellent series.
-
Hybrid servo motors
Up to 1000mm/s speed for engraving images, and super smooth vector cutting quality
High quality laser tube
Every laser tube is subjected to a strict quality control test before leaving our factory resulting in higher quality products for our customers.
Pass-Through Doors
Allowing you to work with pieces larger than the size of the bed.
Alarm Lamp
Shows the current work state and lets you know when your job is done for your safety and convenience.
Smart Board
Automatically turns the air assist and ventilation on and off providing you with a quieter and lower cost working environment
Dual Air-Assist System
Allowing for easier selection of adjustable high or low air flow making sure your work is the best quality possible.
-
Water Chiller
Air Assist
Exhaust
2″ Head
Tool Kit
Cleaning Kit
Honeycomb / Knife Bed
Pass-through Doors
Alarm Lamp
Smart Board
Red Dot Pointer
Auto Focus
| Laser System | NOVA 24 | NOVA 35 | NOVA 51 | NOVA 63 | |
| Laser Tube Wattage | 40Watt OR 60Watt | 80Watt OR 100Watt | 100Watt OR 130Watt | 100Watt OR 130Watt | |
| Work Area | 600x400mm(23.6″ x 15.7″) | 900x600mm(35.4″ x 23.6″) | 1300x900mm(51.2″x35.4″) | 1600x1000mm(63.0″x39.4″) | |
| Max Part Size (WxLxH) | Front door closed |
700x530x170mm(after taking out the honeycomb bed)(27.6″ x 20.9″ x6.7″) |
1000x730x230mm(39.4″ x 28.7″ x9.0″) |
1400x1030x230mm(55.1″ x 40.6″ x9.0″) |
1700x1130x230mm(66.9″ x 44.5″ x9.0″) |
| Pass-through door |
700x∞x20mm(27.6″ x ∞” x 0.8″) |
1000x∞x20mm(39.4″ x ∞” x0.8″) |
1400x∞x20mm(55.1″ x ∞” x0.8″) |
1700x∞x20mm(66.9″ x ∞” x0.8″) |
|
| Table Size | 700x530mm(27.6″ x 20.9″) | 1000x730mm(39.4″ x 28.7″) | 1400x1030mm(55.1″ x40.6″) | 1700x1130mm(66.9″ x 44.5″) | |
| Z Axis Height | 150mm(5.9″) | 230mm(9.1″) | 230mm(9.1″) | 230mm(9.1″) | |
| Dimensions(WxDxH) |
1070x810x610mm(42.1″ x 31.9″ x24″) |
1500x1105x1040mm(59.1″ x 43.5″ x40.9″) |
1900x1405x1040mm(74.8″ x 55.3″ x40.9″) |
2200x1505x1040mm(86.6″ x 59.3″ x40.9″) |
|
| Net Weight |
130kgs(287lbs) |
310kgs(683lbs) | 430kgs(948lbs) | 470kgs(1036lbs) | |
| Laser Type | Sealed Co2 Glass Laser Tube | ||||
| Cooling | Water Cooled | ||||
| Motion Control System | High-Speed Hybrid servo motors | ||||
| Maximum Speed | 1000mm/S(39.4 IPS) | ||||
| Speed and Power Control (engraving depth) | Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping. | ||||
| Operating Modes | Optimized raster, vector, and combined mode | ||||
| Resolution(DPI) | User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head) | ||||
| Computer Interface | Ethernet and USB Connection | ||||
| Compatible Operating Systems | Windows XP/2000/Vista/7/8/10 | ||||
| Buffer Memory | 128MB Standard | ||||
| Display Panel | 3.5″ LCD panel showing current file, total working time, laser power, speed etc. | ||||
| Electrical Requirements | 110v,60 Hz, single phase | ||||
| Ventilation System | Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case. | ||||
-
FAQ
Laptop& Desktop PC both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10. But if you use a Mac you need to buy a Lightburn software with $80 https://lightburnsoftware.com/collections/frontpage/products/lightburn-dspCorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAWAs long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too. https://www.thunderlaser.com/video/what-laser-cutter-can-create.html https://www.thunderlaser.com/video/how-to-use-your-laser-machine.html https://www.thunderlaser.com/video/how-to-use-your-laser-software.htmlNo, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
Accessories
Allows you to easily position designs directly on the products inside your laser bed, as well as monitor your jobs
Broaden your cutting capability with a 4” focal lens, comes ready to install in a cutting head
Suitable for engraving high precision designs and photos, as well as 3D engraving
A rotary tool will allow for engraving cylindrical glass, wood or metal products like tumblers,wine bottles or pens
Thunderlaser exclusive lightburn DSP license key
Get in touch
Phone
+1403 - 814 - 9808
sales@thunderlaser.ca
Address
Fuse33 Makerspace
1720 Radisson Drive SE Calgary, AB, Canada. T2A1Z8